lampraven0

Add a Sparkle to Your Fiat 500 Key Fob These cute silicone covers will add a little excitement to your Fiat 500 Key fob. These covers are simple to put on and snap over your black cover. The silicone covers protect the keys from dust, splashes and other contaminates. The covers made of silicone also make your keys appear more elegant. The signals of the remote control are not affected and work even when the cover is closed. Protects your keys from dust and splashes Add a stylish touch to your key with this silicone cover. It perfectly fits around your key fob and does not move. It also shields your keys from splashes and dust. The silicone cover won't affect the signals sent by your key remote, so you can still use the keys fob buttons just as you would normally. Accessorize your Fiat 500 in Grey or Black with these cool covers. These covers are perfect when your original cover is looking a bit worn, scratched or damaged. The covers are made of premium silicone and come with 2 key rings, which means they can be swapped out when you are bored with one color. fiat 500 key The Keylab are designed to replace the black key cover that came with your vehicle. They will not work when you have the original key cover installed. Great look! Fiat are a unique and well-known Italian brand, and their cars sport a unique style that makes them stand out from the rest. These sparkling car key covers are a simple and enjoyable option to add a touch of sparkle to your keys without being too overpowering. They look stunning on your key fob and can be used to refresh a worn-out one. These covers snap into place and are designed to replace your original black cover. It is a good idea to remove the cover prior to installing this. The Fiat logo is printed in both Grey and black. So if you decide to change your preference, you are able to change it! They are also great gifts for Fiat 500 owners. Easy to install Fiat 500 key covers can be a great method to upgrade your keys. They are available in a range of colors and styles, making it possible to find the perfect fit for your style. The most appealing aspect is that they're very simple to install, meaning you can put them in place in about 10 minutes. You only need an screwdriver and some time. The first step is to take off the cover that was originally installed. This needs to be removed before the new cover can be installed. After removing the old cover You can then use a flathead for prying the four major attachment clips from the driver side of the fob assembly. These are marked in red on the picture below. Also note the locating tab slots in yellow that must be removed also. Replace the battery with a # CR2032 coin cell battery. Make sure that the “+” positive side of the battery is aligned to the opening in the fob and that the –” negative side is facing the buttons made of rubber. Re-attach the passenger side mirror cover by aligning the tabs that locate it. Once you've completed this, put the driver-side fob back into your vehicle and test it. Press the push button located on the back of the key. If everything works as it should the car should turn on the parking lights and the doors will lock automatically. Easy to remove Fiat 500 Key Covers are a fun way to freshen up your key fob. Easy to install, they have a unique look. They shield your key fob from dirt, scratches and smudges. In order to install a new cover, you'll first need to remove the old one from your vehicle. It is as easy as pressing the red “Fiat” button on the front of your key fob. Pressing the button will release an lever that permits you to remove the key ignition switch made of steel (1). After you have removed the keys made of metal there is a small silver switch that displays images of a padlock locked and unlocked beside it. This is the key fob battery switch. It is simple to replace the battery by turning the switch a quarter turn with a small flathead screwsdriver. The key fob contains the microchip that connects to the Body Control Module. When you insert the key in your Fiat car, it presses a button on the ignition switch, which functions as an “key-in-ignition” reminder. The BCM will then be in a position to read the transponder on the key fob, and verify that it's a valid. You can also add a sports-inspired twin pack to your key covers to give it an interesting and unique look. These covers snap in place over the original cover. They are available in Cream and silver. The key cover will only work in the event that you remove the black cover from your key fob.